The Optimal Solution for Circulating Water System Maintenance
The Electro Life EL-10A-1 is our self-developed product that utilizes electrolysis technology to effectively eliminate scale build-up in cooling towers and circulating water systems (Patents 4214139 and 4644677).
It offers a stronger removal effect compared to chemical treatments, magnetic methods, and mild electrolysis techniques. This is designed to maintain the efficiency of heat exchangers, significantly contributing to energy conservation and CO₂ emission reduction.
Furthermore, the device is safe to use, as it does not cause corrosion or damage to pipes.
Improvement in the Passage Section of an Oil Cooler
After Electro Life was installed for two weeks, almost normal water flow within capillary pipes was secured. No more scale build-up after two months.
Before installation
After 2 weeks
After 2 months
Improvement in Coolant Piping (Non-Destructive X-ray Evaluation)
Scale build-up within pipes:
We used a special non-destructive X-ray detection device to measure blockage within a 50A pipe. The result indicated a significant improvement in pipe blockage after around 3 months.
Water Passage Inlet for Cooling Die Cast Molds
Changes of conditions within a pipe before and after the installation of Electro Life:
Scale build-ups become more severe from evaporation caused by rising temperatures within a pipe.
After approximately 1 month, Electro Life’s scale removal resulted in changes as shown in the images above.
Closed Circuit Cooling Tower
Removal of scales within a closed-circuit cooling tower:
Removal of scale build-ups within a closed-circuit cooling tower in the automotive manufacturing factory.
Most scales were removed after two months. In this case study, the cost could be maintained at 1/10 of that before the use of Electro Life.
It’s surprisingly easy to install the Electro Life device.
Weighing 40 kg, Electro Life is lightweight. It can be relocated without the use of cranes.
There’s no need for pipe cutting as well.
Some of the circulating water from the accumulated water at the base of the cooling tower or from a tank within the circulating system will be drawn into Electro Life via a hose.
On the other hand, water from Electro Life’s outlet will be fed back via hose to the water station. (This establishes a bypass for Electro Life and enables water circulation.)
※Because of this, even if Electro Life stopped functioning due to unforeseeable causes, the operation of the equipment won’t be suspended at all.
GMI is a leading industrial solutions provider in Indonesia, specializing in Special Purpose Machines (SPM), plastic joining technologies, and industrial cleaning.
Address
Kaw. Industri Jababeka 1, Jln. Jababeka III H Blok C17 ET, Kec. Cikarang Utara, Jawa Barat 17530
Marketing Services
Social Media
Copyright © 2024 PT Global Mega Indonesia. All Rights Reserved
